HALE pump 6000L/min imported chassis airport fire truck 6 seats
monitor 4800 L/min 6x6 drive
Airport fire truck can be used for rapidly rescuing aircraft
passengers and crew, and extinguishing fire. It is also applicable
to building firefighting.
The total weight of airport fire truck is 29 tons, using the German
Mercedes-Benz ACTROS 3360 chassis, 6 × 6 drive, Germany
Mercedes-Benz OM502LA water-cooled V-type eight-cylinder 24-valve
turbocharged and intercooled diesel engine electronically
controlled common rail injection, 9500L water tank, 1200L foam
tank, equipped with controlling fire-fighting equipment and rescue
equipments in the cab.
Manufacturer: DCEC CUMMINS engine
Model: L375 type supercharger-air cooled diesel engine
Rated power: 276kW/2200rpm
Max. torque: 1480N.m/1400rpm
Low idle speed: 800rpm
Engine working temperature: -20～+40℃, common workload 80%
Manufacturer: America HALE
Flow rate: Normal pressure: 1.0Mpa, 6000L/min.
Driving: By the rear-mounted DCEC CUMMINS engine power ≤195kw /
Vacuum device: Electric primer pump, Max. suction depth is 7.5m,
vacuum ratio 85%,prime time ≤80s
Pipeline material: pipeline and ball valve are made of stainless
Tank water inlet: two for each side (total is four), with strainer
Tank suction pipe: DN150 butterfly valves with electric and manual
Outer suction tube: DN150 suction port with butterfly valve
The left outlet: 2 DN80 normal pressure outlets. With manual valve
The right outlet: 2 DN80 normal pressure outlets. With manual valve
Water cannon tube: a DN100 normal pressure pipe, connected to the
roof cannon, by pneumatic valve control switch.